ACR RLB-36 GlobalFix iPRO GPS EPIRB with Digital Display - Cat I

ACR RLB-36 GlobalFix iPRO GPS EPIRB with Digital Display - Cat I
Brand: ACR
Product : ACR RLB-36 GlobalFix iPRO GPS EPIRB with Digital Display - Cat I
Availability : Contact Us
0 (0/5)  0 reviews  |  Write a review

The ACR GlobalFi™ PRO broadcasts a unique registered distress signal that not only tells rescuers where you are, but who you are. The internal GPS will automatically turn on and acquire your position upon activation and then utilizes a powerful 406 MHz signal to relay your distress call to orbiting satellites. As local Search and Rescue is deployed, a separate homing signal and integrated LED strobe light guide rescuers to your exact location.

The GlobalFi PRO is small and rugged and comes with over 53 years of life saving technology built into every one. Performing a full functional self test of the GlobalFi PRO internal circuitry, battery voltage and power, and 406 MHz transmission gives you the peace of mind knowing your EPIRB will work the moment you need it the most. ACR Exclusive: Built-in GPS acquisition test mode allows you to test the internal GPS receiver to ensure it's working properly.

Tap in to the same field-tested rescue technology used by the U.S. Military, Coast Guard, NATO, Special Forces and Arctic explorers. 

Features:
Highly visible LED strobe - Energy efficient
Internal 66 channel GPS - Fast cold start
High efficiency electronics - Performance you can count on
Non-hazardous batteries
Professional grade design - Engineered, tested and built for years of abusive marine use
Ergonomic, compact design; Smallest, feature-rich EPIRB available
If you use it...ACR will replace it, Free of Charge. Simply submit your story, send ACR your used beacon so they can have it mounted on their Wall of Fame, and they'll send you a brand new beacon of equal or greater value


Specifications:

  • Part Number: 2842 (Category I); 2844 (Category II)
  • Model Number: RLB-37
  • Size (no antenna): 7.0 X 4.2 X 3.6" (17.7 X 10.7 X 9.1 cm)
  • Weight: 20.5 oz (581 g)
  • Digital Display: No
  • GPS: Internal GPS
  • Battery: Class 2 (non-hazmat) lithium batteries
  • Replacement: Replacement due six (6) years from date of manufacture or five (5) years after beacon is placed into service, whichever is first, or after emergency use
  • Material: High impact UV resistant polymer
  • Deployment: Category I-Hydrostatic release (auto), Category II-Manual release
  • Activation: Out of bracket and wet, or manually
  • Waterproof: 33 ft (10 m) @ 10 min. Exceeds RTCM standard
  • Output Power: 6.3 W +/-2dB (406.037 MHz) 50 mW +/-3dB (121.5 MHz)
  • Operational Life: 48 hours minimum @ -4°F (-20°C)
  • Typical Performance 65+ hrs. @ -4°F (-20°C); Longer in higher ambient temperature
  • Operating Temperature: -4°F to +131°F (-20°C to +55°C ) (Class 2)
  • Storage Temperature: -30°F to + 158°F (-34°C to +70°C)
  • 406Link.com 420 satellite detectable basic self tests

Accessories:

  • SeaShelter™3 (P/N 9501)
  • LowPr™3 (P/N 9502)
  • Cat I HydroFix™ HRU (P/N 9490)

Approvals:

  • Cospas-Sarsat
  • FCC
  • MED
  • IC

Acceptances:

  • USCG
  • Meets: GMDSS, RTCM, IEC, and IMO standards

Category I vs: Category II EPIRBs

  • Category I EPIRBs automatically release from their mounting brackets when immersed in 15' or more of water
  • Category II EPIRBs must be manually released from their mounting brackets

Once released from their mounting brackets, both Category I and Category II EPIRBs can be activated automatically by immersion in water, or manually by following the activation instructions printed on the unit. 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:




© CV. LIFERAFTS ASIA 2024